Are you having trouble getting your Wi-Fi signal to extend further or have a better connection? With modern technology, we need Wi-Fi, whether for work or for entertainment. Whether it’s streaming a movie or video conferencing with colleagues, it’s nearly impossible to be productive without internet access these days. If your current level of Wi-Fi isn’t good enough, fear not: this blog post has all the tips and tricks you need to improve your network coverage so you stay connected wherever you are in the house!

How to determine a weak WiFi signal or in the standards?

Weak wifi signals can be frustrating and time-consuming. The good news is that there are some steps you can take to quickly determine if your wifi signal is up to snuff – so you don’t have to spend hours troubleshooting it. One of the surest ways to know if your wifi connection is strong enough is to download a free app like Analiti or Fast Speed ​​test and run a baseline test. By looking at the results of this test, the user will be able to tell if their current speeds are within acceptable standards according to their ISP. Fortunately, these tests take no more than a few minutes, allowing users to get answers and peace of mind as quickly as possible.

Tips and tricks for extending your Wi-Fi networks.

  1. Use the mesh network:

Mesh networks allow you to spread your internet connection across multiple devices and increase coverage throughout your home. Mesh routers like Netgear Orbi and Google Wifi often come with a base unit connected to a modem and then additional satellite units that you can place in different parts of the house. This allows for seamless roaming from room to room, without the need to manually switch networks as you move.

  1. Place wireless access points strategically:

If each access point is far enough apart from the next, there will be less interference, which can improve coverage throughout your home. Placing them at opposite corners of the house can be ideal for providing coverage at both levels. Also, if there are obstacles between two access points (such as walls or furniture) that could reduce signal strength, try moving them further apart or closer together so they can communicate more effectively.

  1. Use WiFi extenders:

These devices act as mini-routers that provide an additional wireless access point in areas of poor connectivity or dead zones in your home. They’re simple to install and can help close the blind spots in your network coverage without requiring the installation of a full mesh system.

  1. Use multiple frequencies:

Most routers broadcast on both the 2.4 GHz and 5 GHz frequencies, although you may need to manually enable them if they are not already enabled by default. The 2.4Ghz frequency has a longer range but is subject to more interference from neighboring networks which can slow down your speeds, while the 5Ghz frequency has a shorter range but is less likely to be interfered with. neighboring networks, which results in faster speeds overall when within range (but also a more limited distance). Using both frequencies allows you to have better coverage throughout your home and get better speeds when possible.

  1. Keep your router up to date:

Manufacturers regularly update their firmware with new features and bug fixes that can help improve your router’s performance and reliability – be sure to stay up to date with these updates! You should also periodically check for any changes in signal strength or any other potential issues that may arise due to changing environmental conditions such as temperature fluctuations or even seasonal changes that may affect wireless signals in your home (such as the increased use of WiFi during holidays).

  1. Change your antenna configuration:

Different physical configurations of antennas on a router can give different results in terms of signal strength and range. Consider adjusting antenna angles or completely replacing antennas if needed to get the best performance from your router setup!

  1. Use heat mapping tools when possible:

Many modern routers come with heat mapping tools that allow you to visualize how waves travel through walls, furniture, floors, etc., giving you an idea of ​​how best to position points. access for maximum signal strength in all areas of the home – this can give you a much better understanding of where weak spots are located so that special attention can be paid to these areas when setting up the network ! You can use some online tools like NetSpot, Ekahau HeatMapper, …

* criptom strives to transmit health knowledge in a language accessible to all. In NO CASE, the information given can not replace the opinion of a health professional.